Hardwood flooring is one of the best additions around the house.
If installed the right way, hardwood flooring can play an important role in increasing the resale value of the house.
However, the problem arrives with the removal of hardwood flooring.
Stripping hardwood from the floor can prove to be extremely expensive.
At the same time, it requires you to pay money for the installation. 2020 Wood Flooring Trends
Hardwood removal is extremely stressful for it will not only cost you money but will also leave the subfloor damaged and create permanent damage and mess.
Often people prefer hiring professionals for the removal of a hardwood floor but mostly prefer doing it by themselves.
While it may sound extremely convenient to do so, it is not.
It is necessary to be careful with the removal of hardwood floor for various advantages.
Why do people remove the hardwood floor?
Every flooring material has longevity and limitation.
No matter how good you have been maintaining it, after a certain period of time, the hardwood floor tends to lose its effectiveness.
To leave the hardwood damaged it will cost you a lot of money.
Moreover, hardwood floors can be prone to be permanent damage.
While hardwood floors are meant to increase the aesthetic appeal and resale value of the house, after a certain period of time it will all get damaged.
This damage can however cost you a lot of money.
Removal of hardwood floor only ensures protection from further damage.
Hardwood flooring once removed can be taken into consideration for reinstallation.
Nonetheless, if the hardwood floors are left to be in bad condition, it can turn out to be worse.
This will have an overall negative impact around the house.
As a result, it is extremely necessary to be careful with the hardwood floors.
How to remove the hardwood floor?
While hardwood removal sounds easy, it is not. how to remove hardwood floor
Removing hardwood off the floor can consume a lot of time and eventually cost you money.
The professional removers usually cost a significant amount of money for getting the entire thing removed.
Some of the prominent and easy ways through which you can get the hardwood floor removed include the following
Prepare the working area
Preparing the working area and determining which areas should be cut out is the main concern.
You need first to chalk out a plan regarding how much area you want to remove and where you shall start.
Not everyone wants to remove the entire floor. Hence marking the area will only make things easier for you.
Cover the essentials
Hardwood floor removal is going to create a lot of mess, dirt and debris.
You would obviously want to keep out these things.
As a result, you may lay down the tarps to prevent dust and debris control.
Using the carpet you can cover all the essentials of your house to prevent the dirt from being collected on them.
Safety tools are a necessity when you are removing the hardwood floor on your own. Before getting started you need to ensure that you clean everything.
Since you are at the risk of being exposed to hazardous materials make sure that you have enough long sleeve clothing and knee pads as a lifesaver. Woodworking Safety rules
Saw the boards
You need to divide the boards into different sections and saw them at length so that you can easily cut it.
Nonetheless, you need to ensure that you maintain the same thickness for all the ends running from one side to another.
Pry to pull up the boards
Once you have divided the boards into three sections it won’t be easy for you to pull up the bars.
However, you will need to use a pry to pull up the bars.
If you saw the board in smaller sections it will be easier for you to pull it out.
If you’re doing it the right way, each bar in the small section will keep popping out.
Remove the old flooring
Once you have removed the bars, it is time that you dispose of it.
The removal of hardwood flooring is going to create a huge mess because the discarded wood fragments would keep moving.
This will eventually have a negative impact overall.
You should collect the flooring materials in a bag and then remove it.
You should get a disposal bin so that you can easily remove stray nails and jagged edges.
Sweep the remaining nails and staples
Since the hardwood floors are often joined by nails and staples, you need to ensure that you remove them properly.
Leaving them loose on the floor can cause a lot of risks.
Since they can easily affect you, it is better to ensure that you have removed them properly.
If you cannot sweep it out, you can use a powerful magnet to pick it up and remove.
Protruding nails can prove to be hazardous and risky.
You surely won’t want yourself in such a situation.
Clean the area thoroughly
You need to ensure that the area you worked on is thoroughly cleaned.
The collected sawdust, dirt and dust can cause a huge mess around and prove to be extremely harmful.
There may be woodchips lying and other debris around in small pieces which if left like that can be a threat.
You need to ensure that you use a suction pump to remove these. Using a broom or vacuum cleaner you can get rid of the tarps and rolls.
You need to throw these items out of your house.
Using a vacuum cleaner will eventually help to remove and mop all the remaining fine dust.
Dust-attracting sprays can be as well effective for the removal of dust.
What to do with the wood remaining?
The salvaged wood can further be used in smaller projects.
If the wooden flooring is in the condition to be used for other projects, you can remove them and store it for future use.
However, the ones that you have removed needs to be thrown out for they will not serve any good.
Hardwood removal can often be risky, which is why you should prefer reaching out to experts.
Never opt for doing it yourself without proper safety measures.